Wooded Plateau The Talos Principle 2 Walkthrough - Puzzle Solutions

Quantum tunneling

Approach the drill, point it at the opposite wall, behind which there is another drill. Make a hole in the wall. Now head to the drill, go around the wall, take the drill and take it through the hole.

Then head towards the wall where the first drill stood. Make a hole and take the first drill through it.

Then use the first drill to make a hole in the wall.

Также рекомендуем сайт наших партнёров — ТОП лучших игр.

We return for the second drill and carry it through the hole and take the first drill. We install them on the corresponding plates.

Mutual Aid

Go through the red beam and take the drill. Go around the tree and install the drill.

Go back for another drill. Place it in front of the entrance to another part. Take the first ber and point it at the wall. The hole must be made so that the beam penetrates and opens the force field.

Place the deactivator near the wall on the left and point it at the sill field to disable it. Take the drill and go around the wall. Make a hole in the wall near which the deactivator was previously installed. Take it through the hole.

Use the deactivator to open the force field. Take the drill and install it on the corresponding plate.

Backup

Use a drill on a metal wall. Take the connector and install it as shown in the screenshot below.

The force field will open. Go through and pick up the converter and place it near the power barrier on the left. Then take the connector and install it opposite the red receiver.

Take the drill and install it parallel to the connector, as shown in the screenshot below:

Now take the connector and install it a little further:

?lomok" width="100%" class="lazy" data-src="/storage/uploads/guides/2023-11-10/a015fc9380a0d64eb5aadee2ebdb91e8.jpg">

Now go through the force field and install the same connector so that the red beam passes through it.

Now place the drill against the other wall. Use a converter and combine the green and blue rays.

Placement

Take the drill, install it and take the connector. Head to the far corner, install the drill and place the connector on the special plate. The force field is disabled. Take the cube and place it on the fan. Take the connector through the hole. Now you need to point the drill at the metal balcony from above. Use the connector to connect the blue source at the bottom and the receiver at the top. Place the connector on the cube and turn on the fan.

mock" alt="Wooded plateau The Talos Principle 2 - solving riddles and puzzles" width="100%" class="lazy" data-src="/storage/uploads/guides/2023-11-10/d0ede8ba1908dae10a43ea04b2863640.jpg" >

Duet

There is a drill in the room on the left. Without taking it out of the room, point it at the wall to the right, where the lever that turns on the fan is located.

Head over and turn on the fan. Next, install the drill on the metal wall on the left.

Head towards the fan. With its help you will get to the room on the right, in which the deactivator is located. Set it so that it points towards the hole you made with the drill bit. Leave the room via the stairs. The force field is disabled, now use the second drill. Install it and make a hole in the same place. Take the first drill and carry it through the hole. Make a hole again in the same place and take the second drill. Next, install the first drill in the far corner on the right and with?Make a hole in the room with the deactivator. Using the fan, we get into the room again and take out the deactivator. Place it near the purple field. Point the first drill at the wall where the target is. Use the deactivator and turn off the blue fields through the hole. Install the second drill on a special plate.

Passage

Take the fan disk and head towards the running fan in the corner. With its help we get to the balcony. Install the fan disk on a special plate and take the drill. Using the fan, we will get to another balcony, where the second drill is located. Make a hole with one drill and drop another drill through it. Go down and point the drill at the wall at the same hole from below. Go up the stairs and throw the other drill down.

To the right of the entrance, pay attention to the ceiling. Point two drills at him to make the deactivator fall.

Place it on the appropriate pad to turn off the energy field. Point one drill at the second balcony, and with the other drill, jump onto the fan in the corner. Place the drill on the first balcony on the corresponding button and take thefan claim. Jump and throw the disc through the hole. Set it in the center and fly through the blue field.

Eye of a needle

Place the drill on the second button and take the connector. Set it to the first button. Take the drill and head to the first room. Use the drill and take the cube through the hole. Install the connector on the second button. Use the drill on the wall on the right, where the blue source is. Place the cube near the low fence on the left. Jump onto the cube and from it you will get to another room. You need to point the deactivator at the blue force field through the hole on the right.

Take the cube and install it in place of the connector. With the connector, head forward and connect the blue source and receiver. It is necessary to install it so that it is visible through the hole so that the rays pass to the end.

Seesaw

To the left of the entrance is the lost termal. Use the connector and connect the red source and receiver. The force field is disabled. Take the second connector. It is necessary to combine it with a blue source and receiver. Install it so that the beam passes through the iron wall.

Using the first connector, make the red beam pass directly past the wall. Take the drill behind the force field and point it at the iron wall near the red spring. Use the red connector to connect the red beam through the wall. Now take the drill behind the force field and turn it off. The red beam will disappear. Use the drill in the wall. The blue beam will open the barrier.

Head to the temple and build two bridges of four figures:

1. Zigzag to the left, straight, G forward, triangle.
2. Triangle sideways, straight, cube, G to the left.

Inside, turn on the second laser.

Star 3

Third puzzle . Place the first connector near the red source in the corner. Place the second connector near the blue source at the corner. Place the converter in the middle. It is necessary to connect the blue and red rays, and direct the green one into the pyramid near the exitA.

Eighth puzzle . Use the connector and connect the green beam on the right to the Pandora statue on the left. Move under the statue.

Star 4

Near the fifth puzzle, find the Sphinx statue. Pay attention to the numbers 2478. In front of each puzzle there will be a lever on the stone with the number. The levers will only need to be turned on at numbers 2478. After that, head under the statue. Then notice the daisy statue and the yellow sparkle.

When there is the fourth puzzle, head right. Walk along the cliff with rocks and find a stone balcony. There will be a yellow spark.

Laboratory

Between the sixth and seventh puzzles there will be a cave entrance. Inside there is a mechanism for changing the laser. Below, watch the video about Miranda and open the third station. On the second floor there is a balcony with a lost terminal.

Saving connections

Go around the fourth puzzle to find a secret task. Place the drill against the wall on the left. Behind it is a red source, connect it to the connector. Place the drill near the right wall. Save the connections with the connector and further combine it with the red receiver, installing it through the hole in the room where the second connector is located.

After opening the force field, take the second connector. Set him up at corner and pair him with a wide receiver. Take the first connector through the hole and connectconnect it with the second connector, placing it in the middle in front of the purple fields. Place the drill again against the left wall so that the beam is directed all the way.

A loop

From the eighth puzzle, head right. Find a secret task in the forest. Inside, install the connector on the button on the left. Use the drill and remove the wall behind the force field. Take the cube through the hole. Through the same hole, install the connector forward behind the wall. There you need to connect the source and receiver. Then install the connector on the button on the left.

Place the drill in front of the window with bars and open the right wall. Place the cube on the fan. Step on the button to turn on the fan. The cube will fly through the hole. Move the drill to the wall on the left and take the cube. Install it on the button on the front.