Walkthrough Train Station Renovation

We tell you about all the plot tasks of the simulator of the master who repairs stations and trains - Train Station Renovation

yadoville

First, start the learning mode. Go to the indicated place and buy a split-type dumpster. Open all of its compartments to see how the trash should be distributed. For sorting garbage you will receive money. Collect nearby glass bottles, take the bag and drop it into the appropriate compartment. Clean the container, for which you have to pay money.

Sell it and buy a mixed type container. You can throw any garbage there, but you will not receive money for it. Collect the highlighted boxes and discard them. Then go to the building, hold down the mouse wheel and select the sponge. Erase the image by holding LMB and moving the sponge.

On the other corner of the building you need a brush. Paint cracked walls. Use a trowel to remove sticky paper from the wall, and use sandpaper on the rails to clean them of rust. Use a pry bar on the sleeper to replace it. Dismantle with its help and the destroyed bench. The L key allows you to turn on the flashlight, and the ax to destroy large debris.

Take in?Use a bolt cutter and cut off the lock on the warehouse door. Go inside, select the wrench and fix the light switch. Use the broom to sweep the debris in the corner, then press TAB to open the shop. Buy a bench, go outside, press "1" and place the item where the bench was broken.

Buy paint in another section, then select it in the tools and repaint the wall. Tutorial completed, but you can continue to reach 100%. To do this, completely clear the room and stop from broken things. Install one urn and three more benches. Clean rails and replace sleepers. Clear the station. Paint over the white spot (choose a brush, not paint) and pick up all the debris. If something doesn't break, throw it into a container. When you press Q to activate the scanner, inscriptions appear in the upper right corner of the screen. They indicate what else you can do. For example, pick up an object or paint over a wall.

clinville

Select the map by the window, next to the tutorial, and start the first task outside the tutorial chapter. Your tasks:

• Clear the train station.
• Cut the lock.
• Insert fuses.
• Turn onthose electricity.
• Fix the outlet.
• Turn on the lights at the station.
• Open the hangar door.

First, take the bolt cutter from the body, enter the small building by the rails, pushing the wooden pallet, and cut off the lock on the electrical panel inside. Open it and insert two fuses into the top. You don't need to buy anything! Be sure to lower the big yellow lever. Next, go about your usual activities: repair windows, remove debris, clean walls, and so on.

Now head to the main station building. In a small utility room, you need to fix the socket (actually a switch) with a wrench. Once done, use this switch to turn on the light. You have completed the main tasks!

Of the new tasks - you need to fix the wheels on the car with wood, replace two doors of an ordinary building, collect a lot of garbage (pieces of concrete). If there are no tasks in the upper right corner, then they are not in this place.