A detailed walkthrough of a sci-fi adventure in which the player controls the artificial intelligence S.E.M., helping the only survivor on the space station. To reply to Emma, you should always use the R key and click on the required information. Do this for the first time, then inspect the status of compartment 9 and transfer the required data to Emma (via R). Do this with compartment #10. Perform AI diagnostics. Run all three processes and interact with the data on the right screens. For the first time on the right, you will simply need to click on the start of diagnostics, and then report the data. The second time, run each of the four bars with the W key and show the data. For the third time, hold LMB on each circle and tell Emma the information highlighted in red. Rotate the camera, switch to the next one. Then examine the document on the wall using the zoom wheel. Examine the laptop, hatch control panel and open the hatch to compartment 11. Wait until Emma grants access to the rest of the ship. Through the "Space" switch to compartment number 4 to see the fire, and report it to Emma. She will go to you. On the way, open the hatch to compartment #6. Emma will take a fire extinguisher and ask you to break open the hatch to compartment number 4. Move over there and do it with the panel on the side. Open the hatch when Emma says so, and then wait. The fire is extinguished. Open the vent??ation on the left and wait. Enter Emma's authorization code according to the prompt on the screen (Emma's code itself will dictate, it also appears at the bottom of the screen). Give her the answer code. Select the rotating circles and click LMB. If the right one rotates, then select it with the D key, the left one - A, the top one - W, the bottom one - S. Then select the circles located diagonally from the center. The top right is selected by simultaneously holding W and D, and so on. Examine the compartments outside. Report damage to the top of the first chamber, the right to the third, the top to the fourth. There is no damage on the second chamber. When you do this, Emma will switch SAM to the last camera and you will see Saturn.
Turn on the reactor
Get familiar with the management of the sphere. Fly to Emma twice, point to another sphere through R. Move to the far compartment with the image of a yellow atom. The reactor is hidden there. Having reached the place (the light will turn off in the fifth compartment, but Emma will turn it on), in the second compartment, study the computer and get the hatch unlock scheme. Through the compartment camera, interact with the panel and apply the schemes by holding the RMB. In the diagram, the L3 configuration allows the sunroof to be unlocked. Hold LMB on the starting point and use WASD to draw the same path as in the diagram (RMB to see it). Inside the compartment, approach the reactor (on the sphere) and interact with it. Click on 1 and 2, then hover over eachth square and decrease/increase the strength of the magnet. The oscillating contour should go around the central circle. This will enable button 3 (redirect). After that, choose the same symbols that the mysterious black figure shows. Watch the video. Work in outer space
Fly to compartment 11, examine the 3 leaves on the wall on the left and open the "Data Core". Combine 3 fragments with the main one, flickering, then use the panel to open the gateway and get out. Having done this, fly to the EAS-03 module and find the blue panel. Activate the three red contact points. To do this, press and release the keys indicated on the screen in time. Return to Emma and open the hatch for her. She will take you to the UNI wing, and you will see the dead Stas. After that, open the "Station Alerts" tab and select the red square with the cooling system. Point to this Emma and move to the desired compartment with this system (red marker). Turn on the computer by activating the outlet and examine it. Examine the document next to the outlet. Through the "Data Core" combine all the fragments to get a diagram of the cooling system. In the same room, find three panels. Use them and the circuit you found to activate the system. Each yellow panel has numbers. In the diagram, these figures are compared with one or another configuration (L1 / L2 and so on). After running three boxes, use a working monitor andlaunch each block through the "Start" button. Through the "Run" button, activate the entire node. You will see Mei. Examine the KIT compartment. Then return to Emma. Open "System Alerts" and select the next red square with sensor sensors. Three sensors are located in different UNI compartments. On the map you can see their markers in blue. Navigate, interact with white monitors and activate them through calibration. You will need to click on the squares of the specified color. Once all three sensors are running, a new "Employee Sensor" tab will appear. Open it and report to Emma about all the data on Jim and Josh. You will find yourself in the RUS compartment, where the captain is located. Move to compartment RUS-06, but the camera will not work. Open the "System Alerts" section, select the red square with RUS-06 and report it to Emma. She turns on the cameras. Move to compartment RUS-06 and point Emma to Captain Jim. Wait for it to approach the module. Examine the laptop and find the code 9338 on the back. Enter it on the laptop and get the RUS hatch diagram. Open the hatch to the RUS-06 module and watch the cut-scene. Move to the RUS-02 module and move into the sphere. Get out through the nearest airlock. Fly to the KIT-01 module, where you will find Mei. Examine it, find a blue panel nearby and activate two points of contact. Having done this, return to Mei to complete the mission. Episode 3
Listen to EmmaThe next step is to recognize the voices. She will give you assignments. Go to the chamber of the EAC-07 module, but there is no access there yet. Contact Emma and tell her about it. You will be inside as soon as Emma turns on the cameras. There will be a photo of Jim on the wall with the caption 2008. To get the identification code, enter this number on one of the two computers. Having learned the identification code, tell it to Emma using the R key. Head to the RUS-04 compartment. Before using the computer, you need to activate the near and far field sensors (near the computer). Find the coordinates for the station that Emma was talking about. To do this, enter the coordinates on the "Communications" tab: PV 16-14-22, DEC 48-11-11. Select Emma Fischer in the signal router. Next, you need to turn on the external antenna and start searching for data. Watch the video. Find the orb in EA-09. Follow Emma, you need to open the gateway. Roller will start. Further you will find yourself at the station. Go forward. You will see a hatch, inform Emma. Go further, Emma will open the hatch, pay attention to the square hatch below. Also tell Emma about it. When she opens it, go to the control room. Examine the laptop using the R key. Listen to the message and follow Emma. You will reach Jim's room. Head to Emma, she will extend her hand. She will use the flashlight in the sphere. Episode 4
Now you eatnatural route through the corridors. Look at the messages on two laptops. You will see the hatch Rus 01. Tell Emma to open it. Also inspect the hatch to the left. It leads to compartment UN 5. There will be a room with suitcases, as well as a laptop. Having collected all the data, you need to combine them in the kernel. So you will collect a dossier on Jim. Go to the previous section. Follow forward, there will be a new laptop and a letter in the room. Head into the room on the left, you will see a hatch above the round table. Tell Emma about this so that she opens it (the control panel is located on the side). Inside, familiarize yourself with Emma's body. Use the glowing monitor and the pipe end that is located in the center of the room. Look around and ask SAM questions using the R key. Head back and you'll see Josh. Watch the video. Episode 5
EMS will be disconnected from all systems. Look around the different nodes, you need to find "Connection". Once you switch to the camera, inspect the laptop by examining three documents. You need to connect the blinking node to the two blue fragments in the data core. This will give you the Journal of Experimental Flash Memory. Use acceleration. This will open the red door. Head down the corridor to the right. You will find a room where Jim's body will be. Now you need to knock out the ventilation grate on the wall. Head for the ventilation trube. Try to avoid meeting Jim. In search of a new point, you will reach the Chinese compartment. You will hear Jim talking. At the very end there is a room with a laptop. Enter password 2491 and read the document. Remove the grate on the wall again and move along the ventilation pipe. Jim will turn off the sphere again. Connect to it again. Head to the room with the round table. You need a ventilation pipe, which is located near the starting point. At the Round Table you will find the SAM mainframe. Interact with the interface so you can resume SAM functions. Will will contact you shortly. Talk to him, select Jim in the employee gauge. Give all the data to Will. Show Will using the camera. Move to compartment RUS 06 and show Jim's body. Do the same with Emma. Jim will be disabled. Will will show the protocols to SAM. Open the map and read the new message. Switch to UT 02, then "Command Terminal". You need the following values: D76 - 5; E43 - 2; H62 - 9 Protocols will be disabled. Next, you will find a mini-game. Notice the squares. They are similar, but they have differences. In one of them, the upper square is white, in the other it is transparent. Watch the video at the end. Episode 6
Head to the room where Jim is. Use the life support terminal. The numbers will start to change in the lower right corner. Reverse?Pay attention to the first cell, a red number will appear there. The same number must be pressed on the dial. Use only red numbers. Use the panel with the green light (on the right side of Jim) to close the hatch. Examine the diagram to choose the correct path to close hatch L1. Then study the scheme L4. The second and third hatch must also be closed. To remove air, press the button on the right on the panel of the life support system. Head to EAS 11. You need to open the gateway to launch Emma. Use RMB to put a mark on the map. You need those passages where there is a Waypoint sign. Watch the video clip. Head to RUS 04. Use the astrophysical measurement terminal. Find land and enter the following coordinates RA 8-38-24 / DEC 32-14-12. To transfer, select Emma. Next, in the Station Alerts line, select the red square and inform Emma about it. In UC 01, using the navigation system, hold LMB on the number 2. Next, you need to set up several scales on another screen (96/44/13/33/46/94). We start the engine and watch the video.
