Grasslands Ring The Talos Principle 2 — solving riddles and puzzles

Each location has several puzzles that you must solve. Some of them are mandatory, while others are optional.

East 1

1. RGB Shifting

In this puzzle you will learn that when using a RGB converter, you can combine different colors and create new ones. There are three primary colors — blue, red and green. Combining two different colors produces a third.

You need to take two boxes. They are located behind blue barriers with red and blue receivers. First use a converter by combining the red and green sources. Apply the beam to the blue receiver and pick up the cube. Then combine the blue and green sources and feed the beam to the red receiver. Take the second cube. Combine the red and blue sources again, feed the beam to the green receiver. Place two cubes and activate the device.

Также рекомендуем сайт наших партнёров — ТОП лучших игр.

2. Reconnection

There are three sources. Use a converter, combine the blue and green sources and feed it to the red receiver. Take the second converter and place it near the other blue barera with a red receiver. Connect it to the blue source and red receiver. Using the first converter, feed the second green beam (to do this, combine the blue and red sources). Make sure the rays don't intersect.

3. Sparkle

Grab the converter and go to the red button by the blue barrier. Combine the green source behind the barrier and the red source in the main arena. Apply the resulting blue beam to a blue receiver nearby. Make sure to place the converter on the red button. Take the second converter. You need to get the red beam. Place the second converter near the barrier behind which there is a green source. Combine it with red and green sources. Go back to the first converter on the button. Combine it with the green source and the second converter, then point it to the red receiver near the final device.

4. Alternative Option

First, turn on the fan and pick up the converter. Stand on the fan. Combine the blue and red sources and the green receiver. Jump down and place the transformer anywhere. Turn off the fan. Place the cube on the fan. Take the converter via PCM to save all connections! Place on the cube. Turn on the fan and activate the fourth device.